Calendar Style Birthday Card

I made this card for my BFF a few months back for her birthday but just got around to uploading it. Sorry for being MIA for a while, my studies have been so super busy! I went away to present my research at a conference and although it was probably one of the best experiences of my life, it also left me very little free time for a while.

But I’m back in the game and super excited to share with you all my most recent creations, starting with the least recent haha!

I really wanted to showcase when my BFF’s birthday was which is the 29th of December so I printed out, stained and distressed a calendar that I found online.

I used some glimmer mist in Rouge and Cork using my technique on how to prevent paper from wrinkling after soaking it in wet media and letting it dry. You can find that tutorial here.

Once it dried, I stamped some swirls using Versamark and transparent embossing powder. You can see the glimmer mist underneath of it that way.

Then I just finished up the card by adding a gemstone over the top of the 29th of December because that’s the date of her birthday. And then I just embellished with a flower (I don’t remember what it’s called, an accordion flower? Somebody help!) I cut out with my Silhouette Cameo, but you can also use a Tim Holtz die to do that.

I mounted the calendar onto another piece of cardstock which I punched with a Martha Stewart doily punch just on one edge and then distressed the edges with Vintage Photo. 

Finally I mounted everything onto a card with a pretty pink background I dug out from my scraps stash from DCWV Garden Tea Party Stack.

Share your comments below!

How to prevent wet paper from wrinkling when dried

One of the things that I hate about using wet media when scrapbooking or crafting is that afterwards, the paper dries all wrinkly and ugly. As much as I like the wrinkly look for SOME projects, I don’t necessarily like it for ALL of my projects. So, I’ve adapted one of the techniques I normally use for watercolour painting to prevent my paper from curling, developing ridges and overall looking anything other than smooth.

Measure out a piece of cardstock for your project and add 1/2 inch to each of the four sides. Cut it out.
I’ve printed a picture of a calendar for a birthday card project and cut it down to size.

Tape that piece of cardstock to something hard, like a big fat heavy textbook or encyclopaedia. Or tape it to your craft table.

You can use washi tape or masking tape. Masking tape is better but whatever you have lying around is just fine.

I’m using washi tape in the above photo because I have this really terrible washi tape from K and Company’s Smash album. Terrible Terrible stuff. With a capital T. Thankfully, it won’t go to waste because I can just use it for taping stuff down like when I’m die-cutting for example.

MAKE SURE YOU TAPE DOWN EVERY ONE OF THE FOUR SIDES COMPLETELY.
This is essential to ensuring you have your desired final product free of wrinkles. If you miss even a little bit of the paper, you’ll have an imperfect paper after it dries. But hey, maybe that’s what you were going for?

Spray your favourite glimmer mist or use your distressing inks or water colour pencils, etc. Have fun, go crazy, make a mess, it’s all good!

Mine looks like this after:

Now let it dry completely.

It should look like this!

See how flat it looks?

And this is how it looks after I’ve cut it out!

I’m using a rectangle piece of cardstock for my project, but your project may need a different shape. Just use this method to ink up a larger sheet of cardstock and cut/punch out your desired shape after the paper dries. So simple right?

TROUBLESHOOTING

1. Tape lifts up from page after applying wet media.

Possible reasons why:

– Your tape is probably not suitable for wet media projects. Try masking tape, it’s awesome!
– You didn’t press your tape down firmly and there was a gap somewhere. It’s ok, just remove the piece that became unstuck, try to blot the wet area with a paper towel and then stick another piece of tape over it.

2. The paper dried wrinkly

Possible reasons why:

– Your cardstock was too thin. This technique doesn’t work with paper unfortunately because paper is so thin it’s flexible and can stretch a bit when wet. Try using a thicker cardstock next time like Baziill. I’m using Recollections cardstock here which works ok, not the best but ok…it’s cheap.

– Your tape may have come loose upon applying wet media or during the drying process. See above solutions.

And that’s it! Post a comment below if you have questions, this technique allows me to create vintage yet neat projects which I really love!

Have fun with all your wet media!

How to make vintage manly holiday cards tutorial

I made a series of vintage-styled Christmas cards that would be perfect for a male recipient if ever you needed a Christmas card for a dude or maybe just a manly female?

These cards deviate from my normal use of scraps to make cards as the only scraps I used were for the inside of the card for writing a message. However many of the embellies you may want to use for these card styles.

Tools you’ll need:

1. Christmas printed paper

2. Black cards and envelopes

3. Scissors

4. Glue/ATG gun

5. Paper cutter

6. Foam dots

7. Border punch – EK success film strip punch

8. Corner punch

I used a paper stack from Recollections called “Joyful Christmas“. I’ve really been enjoying a lot of the recollections prints, their Christmas collections are really quite well done, maybe better done than many other designer brands out there. So if you’re looking for a versatile paper stack where all the papers just match up really well, try a Recollections stack.

All these cards were made using black cardstock for the card base which I bought at Michaels.

I made three different card styles and 4 cards using just one sheet of 12×12 striped cardstock for the background of all 4 cards! To decorate the background pieces, I used a corner punch from Fiskars.

Style 1: 

I used a fat strip of border paper but then realized that it was too…cream-colored and blended in with the background color. So to make it pop, there was a paper in the collection that was black with white polka dots and I used 2 strips of the black to border the strip of cream. I cut V’s into the ends of the each of the border papers.

The “Joyful Christmas” stack has many sheets of tags and frames that can be cut out. Many of them  have holiday sentiments that just fit so perfectly for a card front. You can also make your own, but I really liked these tags that I didn’t bother making my own.  

style 2:

This card just has a fat band through the middle and a sentiment tag slipped into the middle of the band at an angle. I then cut out a glittery santa and used 3D foam dots to adhere it to the band. Super easy right?

Style 3:

Notice that the background of this card is a little different as it has a strip of red printed and glittered paper at the bottom. Go ahead, mix it up a bit!

For this card, I used my EK success film strip punch to punch long black strips of film to overlay the general card template of sentiment tag over background. Then you I used a “tis the season” sentiment on foam dots to add a sentiment to just above the middle of the card.

And there you are, 3 gorgeous, easy, simple and fast vintage cards for all your vintage needs! 

Have fun making these and please LIKE MY FACEBOOK PAGE if you enjoyed this tutorial!

Until next time!

Sparkly Layered Snowflake Card

This week’s card tutorial brings a fusion of sparkly elegance and vintage chic. I really wanted to do something with layered snowflakes because they are just so lovely layered up with different shapes and sizes. My Silhouette Cameo came in so handy for this because I could pick and choose a variety of different snowflake shapes, resize them however I want to and bam! A layered snowflake haha!

I’ve been taking advantage of my scraps of white and mint cardstock to make my snow flakes.

This snowflake card has 2 different types of embossing, the card background with a sizzix embossing folder and heat embossing for the “Merry Christmas” tag.

The supplies are as follows:

1. One 4.25 x 5 inch card in white with envelope

2. 3x snowflakes of varying sizes cut from scrap white and mint green cardstock. I used my Silhouette Cameo to cut mine which I purchased from the Silhouette store and edited the size and shapes to suit my needs. If you need help with this step, please don’t hesitate to contact me for details. Also, you can always download a few snowflakes and print them on cardstock, then cut them by hand. But if you don’t have a cameo, I highly suggest you add that to your wishlist. Honestly the best machine I’ve ever owned! And hope to own again and again and again!

4. Stamp pads: VersaMark embossing stamp pad and a silver metallic stamp pad

5. Stickles in Star Dust

6. Ultrafine Gold Crystal Glitter

7. “Merry Christmas” stamp and acrylic block if needed

8. Snowflake stamp

9. Make-up sponge

10. Die-cut machine christmas themed embossing folder, I’m using the Sizzix Swirls Ribbons and Snowflakes

11. Ranger Sticky embossing powder

12. Heat Tool

13. Bejewelled brad

14. Hole punch

15. Quick-dry wet glue

16. Foam dots

Instructions

1. Cut a 9.5 x 5 inch card out of white cardstock. Score it down the centre at 4.25 inches. Then place the front flap of the card in the embossing folder, fold the back half around the back of the embossing folder and then run it through your die-cut machine.

2. Take the make-up sponge and ink up the sponge with the silver metallic stamp pad. Gently rub the sponge across the raised embossed front surface of the card. This gives the the front of the card a silvery and wintery sheen and also makes the embossing really pop!

3. Cut out the 3 snowflakes of different sizes. Use a different shade of cardstock for the middle snowflake, like a mint green or baby blue. Decide how you are going to layer the snowflakes on the card. Punch a hole through the centre of each snowflake.

4. Take the snowflake that is going to be the top-most layer. Use the versamark stamp pad and ink the entire surface of the card. Generously sprinkle the Ranger sticky embossing powder over it. Gently tap off the excess. Use the heat tool to heat the powder and then immediately sprinkle white glitter over it. I used Crystal Glitter in Gold which is really just a white colour. Tap the back gently to release loose glitter. I accidentally overheated my sticky embossing powder and it left a burned reddish colour. I tried to cover it with the gltter but it still showed through…which is fine because the reddish colour adds to the vintage effect so it actually worked out for the best!

5. Take the middle layer snowflake and place it on a piece of scrap paper. Ink up the snowflake stamp with silver metallic ink and stamp it randomly over the front of the snowflake. The design won’t show up really well but it looks really cool and shimmery with the silver stamping. Don’t worry about being neat or using the same consistency of colour. Sloppy stamping will actually enhance the vintage effect.

6. Use Ranger stickles, put dots of glitter glue all over the snowflake. Set the snowflake aside to dry for at least 15 mins. You can blast it with your heat tool after the first 5 mins if you want to speed up the drying process. But it won’t look as lovely as letting it dry naturally.

7. Cut a half inch-wide strip of scrap blue cardstock in green. Cut the length to the length of your “Merry Christmas” expression stamp plus an extra half inch. Stamp the Merry Christmas expression with versamark on the little blue tag and sprinkle silver embossing powder over it. Then melt the powder with the heat tool. Snip the corners of the tag with a “V” shape. See picture below if this doesn’t make sense. Punch a hole in the opposite end of the tag.

Layer the green tag and snowflakes as follows starting with the top-most snowflake: top glittered snowflake, blue tag, middle green snowflake, bottom-most white snowflake. Take the top layer snowflake, blue tag and the middle snowflake and glue them together with dots of wet glue making sure to match the punched holes. Then put foam dots on the back of the middle green snowflake, avoiding the punched hole, and then adhere that to the bottom-most snowflake making sure to match the punched holes of the snowflakes.

8. Use the wet glue and adhere the layered snowflake to the embossed white card halfway down the card and to the left towards the folded edge. And then you’re done! Easy peasy!

And that’s it, a great way to use white and green scraps from other Christmas projects, or if you’re like me and can’t bear to part with scraps, then perhaps scraps from last year lol!

Hopefully you have as much fun making this card as I have and I would love to see your layered snowflake cards as well!!!

As always, if you liked this tutorial, please like my facebook page located on the top right hand side of this page.

Up next week, I’ve been meaning to do something with ribbons so look forward to a ribbon card project!