Vintage Paris Card

I was looking through my old cards and came across a few of my favourite ones that I never got a chance to share. So I thought I’d share them here today.

I am exceedingly fond of vintage cards and scrapbooking ideas and there’s no one who does this better than Tim Holtz. So using his stamp set “I see Paris” by Stampers Anonymous, I created a set of cards as gifts for my friends. I’m sad to say that I actually don’t have a physical copy of any of the cards I make because I give them away to friends for birthdays and gifts. But I feel that creativity should be shared and not hoarded for oneself. So when I think about how happy my friend will be to receive a card from me, it really inspires me to create for them.

So here is a card I made for my friend who have always wanted to visit Paris but never got the chance to. So to encourage and motivate them to realize their dreams, I gave them this card:

I embossed a piece of black cardstock with Tim Holtz’s splatter embossing folder…I couldn’t find the name of this one, I don’t remember it and I couldn’t find it when I searched for it. But on the sizzix website, they have a new texture fade splatter set. That one will likely work too. But if you find out the name, please let me know!

I went over the raised parts with a brush dipped in gold acrylic paint.

I was really into mixed media back in the day.

Using my Silhouette Cameo, I cut out a shape of the Eiffel Tower and embossed it using one of Tim Holtz’s grid emobssing folders and then I went over the raised parts with gold acrylic paint. 

To give the Carte Postale (post card) a vintage look, I tore the corners and distressed with a combination of vintage photo and walnut stain. I then brushed the top with a layer of clear crackle paint so that when it dried, it would have that lovely vintage cracked look.

To finish everything off, I embellished the card with flower punch outs and I used like blue pearls in the centre to accent.

So I hope you enjoyed looking at this project as much as I enjoyed making it.

Until next time!

Romantic Vintage Valentine’s Card with Textured Embossing

With valentine’s day just around the corner, I wanted to share my most recent card creation with you all. I bought some gesso a while ago and I hadn’t really had a good chance to use it so I decided to use it in this card.

I’ve titled this card Romantic Fairytale Dream, doesn’t it look like a fairytale from a little girl’s dream? When I was much younger, I used to dream about what it would be like to be a fairy tale princess, to rule over all the land, protect my people and save prince charming. Yes, I know it’s typically the other way around, but I had a lot of strong females as my role models growing up. Us girls can take care of ourselves, and then some.

I started out with a 5 x 4.5 inch white sheet cardstock which I embossed using a sizzix embossing folder. Unfortunately I forgot the name of the folder but it has diamonds with vintage damasks within each diamond.
To make the damask image really pop, I sprayed a sponge with glimmer mist and gently rubbed the sponge across the surface so that it only stains the raised parts of the embossed image.

 

To mask the border because I felt it looked a little strange that it was just empty space, I used gesso, or otherwise known as embossing paste, all around the edge and merging partly into the embossed image. Using my fingertips I dabbed with an up and down motion to give the paste some texture. Embossing paste typically takes a few hours to dry completely depending on how much was used. If it’s a really thick layer, I’d wait until overnight which I did in this case. It wasn’t a particularly thick layer but it I just wanted to be sure.

I proceeded to make my centrepiece now that the background was complete. Using a piece of pink vellum, I cut out a circular shape with rounded border using a Spellbinders die. I then used a carriage stamp to stamp and emboss the vellum with Versamark and champagne coloured embossing powder.

*note: Vellum is really delicate and it’s really easy to over heat and warp the vellum. Don’t put the heat tool too close to the vellum and switch from heating the front to the back frequently.

Using my Crop-a-Dile, I applied eyelets to the top and bottom of the vellum and threaded pink ribbon to attach the vellum circle to the card. I made a bow with the flapping ends of the ribbon at the top of the eyelet.

Using a Tim Holtz crown stamp, I stamped using gold ink on kraft cardstock. I fussy cut out the crown and applied it to the edge of the fancy embossed carriage.

I then stamped a rounded rectangle with the words “Dream” and applied that to the corner of the vellum circle using 3D foam dots. Then I used gesso to go over the edges of the sentiment piece. Finally using Liquid Pearls in Platinum I made little droplets on every other circle in the border. Then I let everything dry overnight.

So there you have it, a fancy vintage valentine’s card. Reminds me of a fairy tale of princes and princesses riding in pumpkin carriages, being carried to their magical destiny.  

 

So there you have it! I hope you’ve enjoyed this card as much as I’ve enjoyed making it. Hope that this Valentine’s day, you can spend it with someone you love, whether that be your beautiful self or with someone who’s dear and special to your heart.

XOXO~

Scary Halloween Invite beckons my ghoulish presence

My BFF, Alice, who’s also an avid scrapper, sent me this gorgeous scary invitation to a halloween party. I was so pleased and amazed at the detail and work she put into it that I just had to showcase it here and show everyone else.

She picked up all the supplies from Michaels. Using a stamp with diamonds she made the background of the envelope and then embossed it. The invitation itself was stamped with different colours and then also embossed.

She even made a few red paint splatters on the front of the envelope to make it look like someone’s blood spilled on it while she was busy working away. Very creepy indeed…I love it!

Graphic Tees using my Silhouette Cameo!

A few weeks ago, my boyfriend and I celebrated our anniversary and being the nerdy scientist I am, I decided to make us some couple T shirts with a video game theme.

So I hopped over to Michaels to pick up a box of white heat transfer material and picked a few simple cotton tees from Joe Fresh at superstore.

I found this really fabulous idea from Matt Allison’s blog for couples tees where one wears pacman and the other wears ghost! I couldn’t use the template that’s on his site but I did find some similar images which I imported into silhouette studio. There are lots of tutorials on youtube which show how to do this. Here’s one from Kristina Werner from KWerner designs.

After cutting out the heat transfer material, I eyeballed where the designs should go and ironed these babies on! Initially I had a really tough time trying to iron the cut outs. The box says to use a piece of cotton over top but scrapbook bloggers online suggest using a thin heat proof material like the liners that you use to cover the bottom of your oven. Alternatively you can also use the Ranger nonstick mat.

A neat trick if you want to save a few bucks is just go to a hardware/department store and pick up a sheet of oven liner. It’s essentially the same thing as a the much more expensive Ranger non stick mat.

Here are the T-shirts I made:

I just love how these Tshirts turned out! They’re so vintage and simple! I loved the white on black because that’s how the video games used to be, just white characters on a black screen and this totally embraces that era.

Soon after, a few of my friends were having birthdays and I thought it would be totally fun and personal to gift them a graphic tee. These were my friends from highschool, then university and everyone’s moved onto bigger and better things. But being science majors we all still have a bit of nerdy inside of us.

So I made them these:

This T shirt features the elements oxygen and magnesium off the periodic table.

And my other friend loves playing video games, we used to play our Nintendo DS together during breaks from class and her favourite game was super mario world!

So I thought this 1 up mushroom tee was super suitable for her:

 

I loved it so much I couldn’t help but try it on hahahahaha

Ignore the weird light spot on my nose…THIS IS NOT A NOSESTRIP hahaha

I’m so excited about exploring the possibilities and combining different colours and more elaborate patterns! So look forward to my next creations!

 

Calendar Style Birthday Card

I made this card for my BFF a few months back for her birthday but just got around to uploading it. Sorry for being MIA for a while, my studies have been so super busy! I went away to present my research at a conference and although it was probably one of the best experiences of my life, it also left me very little free time for a while.

But I’m back in the game and super excited to share with you all my most recent creations, starting with the least recent haha!

I really wanted to showcase when my BFF’s birthday was which is the 29th of December so I printed out, stained and distressed a calendar that I found online.

I used some glimmer mist in Rouge and Cork using my technique on how to prevent paper from wrinkling after soaking it in wet media and letting it dry. You can find that tutorial here.

Once it dried, I stamped some swirls using Versamark and transparent embossing powder. You can see the glimmer mist underneath of it that way.

Then I just finished up the card by adding a gemstone over the top of the 29th of December because that’s the date of her birthday. And then I just embellished with a flower (I don’t remember what it’s called, an accordion flower? Somebody help!) I cut out with my Silhouette Cameo, but you can also use a Tim Holtz die to do that.

I mounted the calendar onto another piece of cardstock which I punched with a Martha Stewart doily punch just on one edge and then distressed the edges with Vintage Photo. 

Finally I mounted everything onto a card with a pretty pink background I dug out from my scraps stash from DCWV Garden Tea Party Stack.

Share your comments below!

How to prevent wet paper from wrinkling when dried

One of the things that I hate about using wet media when scrapbooking or crafting is that afterwards, the paper dries all wrinkly and ugly. As much as I like the wrinkly look for SOME projects, I don’t necessarily like it for ALL of my projects. So, I’ve adapted one of the techniques I normally use for watercolour painting to prevent my paper from curling, developing ridges and overall looking anything other than smooth.

Measure out a piece of cardstock for your project and add 1/2 inch to each of the four sides. Cut it out.
I’ve printed a picture of a calendar for a birthday card project and cut it down to size.

Tape that piece of cardstock to something hard, like a big fat heavy textbook or encyclopaedia. Or tape it to your craft table.

You can use washi tape or masking tape. Masking tape is better but whatever you have lying around is just fine.

I’m using washi tape in the above photo because I have this really terrible washi tape from K and Company’s Smash album. Terrible Terrible stuff. With a capital T. Thankfully, it won’t go to waste because I can just use it for taping stuff down like when I’m die-cutting for example.

MAKE SURE YOU TAPE DOWN EVERY ONE OF THE FOUR SIDES COMPLETELY.
This is essential to ensuring you have your desired final product free of wrinkles. If you miss even a little bit of the paper, you’ll have an imperfect paper after it dries. But hey, maybe that’s what you were going for?

Spray your favourite glimmer mist or use your distressing inks or water colour pencils, etc. Have fun, go crazy, make a mess, it’s all good!

Mine looks like this after:

Now let it dry completely.

It should look like this!

See how flat it looks?

And this is how it looks after I’ve cut it out!

I’m using a rectangle piece of cardstock for my project, but your project may need a different shape. Just use this method to ink up a larger sheet of cardstock and cut/punch out your desired shape after the paper dries. So simple right?

TROUBLESHOOTING

1. Tape lifts up from page after applying wet media.

Possible reasons why:

– Your tape is probably not suitable for wet media projects. Try masking tape, it’s awesome!
– You didn’t press your tape down firmly and there was a gap somewhere. It’s ok, just remove the piece that became unstuck, try to blot the wet area with a paper towel and then stick another piece of tape over it.

2. The paper dried wrinkly

Possible reasons why:

– Your cardstock was too thin. This technique doesn’t work with paper unfortunately because paper is so thin it’s flexible and can stretch a bit when wet. Try using a thicker cardstock next time like Baziill. I’m using Recollections cardstock here which works ok, not the best but ok…it’s cheap.

– Your tape may have come loose upon applying wet media or during the drying process. See above solutions.

And that’s it! Post a comment below if you have questions, this technique allows me to create vintage yet neat projects which I really love!

Have fun with all your wet media!

How to make vintage manly holiday cards tutorial

I made a series of vintage-styled Christmas cards that would be perfect for a male recipient if ever you needed a Christmas card for a dude or maybe just a manly female?

These cards deviate from my normal use of scraps to make cards as the only scraps I used were for the inside of the card for writing a message. However many of the embellies you may want to use for these card styles.

Tools you’ll need:

1. Christmas printed paper

2. Black cards and envelopes

3. Scissors

4. Glue/ATG gun

5. Paper cutter

6. Foam dots

7. Border punch – EK success film strip punch

8. Corner punch

I used a paper stack from Recollections called “Joyful Christmas“. I’ve really been enjoying a lot of the recollections prints, their Christmas collections are really quite well done, maybe better done than many other designer brands out there. So if you’re looking for a versatile paper stack where all the papers just match up really well, try a Recollections stack.

All these cards were made using black cardstock for the card base which I bought at Michaels.

I made three different card styles and 4 cards using just one sheet of 12×12 striped cardstock for the background of all 4 cards! To decorate the background pieces, I used a corner punch from Fiskars.

Style 1: 

I used a fat strip of border paper but then realized that it was too…cream-colored and blended in with the background color. So to make it pop, there was a paper in the collection that was black with white polka dots and I used 2 strips of the black to border the strip of cream. I cut V’s into the ends of the each of the border papers.

The “Joyful Christmas” stack has many sheets of tags and frames that can be cut out. Many of them  have holiday sentiments that just fit so perfectly for a card front. You can also make your own, but I really liked these tags that I didn’t bother making my own.  

style 2:

This card just has a fat band through the middle and a sentiment tag slipped into the middle of the band at an angle. I then cut out a glittery santa and used 3D foam dots to adhere it to the band. Super easy right?

Style 3:

Notice that the background of this card is a little different as it has a strip of red printed and glittered paper at the bottom. Go ahead, mix it up a bit!

For this card, I used my EK success film strip punch to punch long black strips of film to overlay the general card template of sentiment tag over background. Then you I used a “tis the season” sentiment on foam dots to add a sentiment to just above the middle of the card.

And there you are, 3 gorgeous, easy, simple and fast vintage cards for all your vintage needs! 

Have fun making these and please LIKE MY FACEBOOK PAGE if you enjoyed this tutorial!

Until next time!

Sparkly Layered Snowflake Card

This week’s card tutorial brings a fusion of sparkly elegance and vintage chic. I really wanted to do something with layered snowflakes because they are just so lovely layered up with different shapes and sizes. My Silhouette Cameo came in so handy for this because I could pick and choose a variety of different snowflake shapes, resize them however I want to and bam! A layered snowflake haha!

I’ve been taking advantage of my scraps of white and mint cardstock to make my snow flakes.

This snowflake card has 2 different types of embossing, the card background with a sizzix embossing folder and heat embossing for the “Merry Christmas” tag.

The supplies are as follows:

1. One 4.25 x 5 inch card in white with envelope

2. 3x snowflakes of varying sizes cut from scrap white and mint green cardstock. I used my Silhouette Cameo to cut mine which I purchased from the Silhouette store and edited the size and shapes to suit my needs. If you need help with this step, please don’t hesitate to contact me for details. Also, you can always download a few snowflakes and print them on cardstock, then cut them by hand. But if you don’t have a cameo, I highly suggest you add that to your wishlist. Honestly the best machine I’ve ever owned! And hope to own again and again and again!

4. Stamp pads: VersaMark embossing stamp pad and a silver metallic stamp pad

5. Stickles in Star Dust

6. Ultrafine Gold Crystal Glitter

7. “Merry Christmas” stamp and acrylic block if needed

8. Snowflake stamp

9. Make-up sponge

10. Die-cut machine christmas themed embossing folder, I’m using the Sizzix Swirls Ribbons and Snowflakes

11. Ranger Sticky embossing powder

12. Heat Tool

13. Bejewelled brad

14. Hole punch

15. Quick-dry wet glue

16. Foam dots

Instructions

1. Cut a 9.5 x 5 inch card out of white cardstock. Score it down the centre at 4.25 inches. Then place the front flap of the card in the embossing folder, fold the back half around the back of the embossing folder and then run it through your die-cut machine.

2. Take the make-up sponge and ink up the sponge with the silver metallic stamp pad. Gently rub the sponge across the raised embossed front surface of the card. This gives the the front of the card a silvery and wintery sheen and also makes the embossing really pop!

3. Cut out the 3 snowflakes of different sizes. Use a different shade of cardstock for the middle snowflake, like a mint green or baby blue. Decide how you are going to layer the snowflakes on the card. Punch a hole through the centre of each snowflake.

4. Take the snowflake that is going to be the top-most layer. Use the versamark stamp pad and ink the entire surface of the card. Generously sprinkle the Ranger sticky embossing powder over it. Gently tap off the excess. Use the heat tool to heat the powder and then immediately sprinkle white glitter over it. I used Crystal Glitter in Gold which is really just a white colour. Tap the back gently to release loose glitter. I accidentally overheated my sticky embossing powder and it left a burned reddish colour. I tried to cover it with the gltter but it still showed through…which is fine because the reddish colour adds to the vintage effect so it actually worked out for the best!

5. Take the middle layer snowflake and place it on a piece of scrap paper. Ink up the snowflake stamp with silver metallic ink and stamp it randomly over the front of the snowflake. The design won’t show up really well but it looks really cool and shimmery with the silver stamping. Don’t worry about being neat or using the same consistency of colour. Sloppy stamping will actually enhance the vintage effect.

6. Use Ranger stickles, put dots of glitter glue all over the snowflake. Set the snowflake aside to dry for at least 15 mins. You can blast it with your heat tool after the first 5 mins if you want to speed up the drying process. But it won’t look as lovely as letting it dry naturally.

7. Cut a half inch-wide strip of scrap blue cardstock in green. Cut the length to the length of your “Merry Christmas” expression stamp plus an extra half inch. Stamp the Merry Christmas expression with versamark on the little blue tag and sprinkle silver embossing powder over it. Then melt the powder with the heat tool. Snip the corners of the tag with a “V” shape. See picture below if this doesn’t make sense. Punch a hole in the opposite end of the tag.

Layer the green tag and snowflakes as follows starting with the top-most snowflake: top glittered snowflake, blue tag, middle green snowflake, bottom-most white snowflake. Take the top layer snowflake, blue tag and the middle snowflake and glue them together with dots of wet glue making sure to match the punched holes. Then put foam dots on the back of the middle green snowflake, avoiding the punched hole, and then adhere that to the bottom-most snowflake making sure to match the punched holes of the snowflakes.

8. Use the wet glue and adhere the layered snowflake to the embossed white card halfway down the card and to the left towards the folded edge. And then you’re done! Easy peasy!

And that’s it, a great way to use white and green scraps from other Christmas projects, or if you’re like me and can’t bear to part with scraps, then perhaps scraps from last year lol!

Hopefully you have as much fun making this card as I have and I would love to see your layered snowflake cards as well!!!

As always, if you liked this tutorial, please like my facebook page located on the top right hand side of this page.

Up next week, I’ve been meaning to do something with ribbons so look forward to a ribbon card project!

 

vintage christmas card

My tutorial on how to make a vintage style Christmas card!

The 3 photos above show the one that I created last year and sent to one of my friends but since this was such an awesome and lovely card, I wanted to make a bunch more this year too and give them away to other friends as well. It works quite well if you’re looking for a Christmas card to give to one of you guy friends because it’s not too girly haha!

This card has a postcard theme and I specifically bought this stamp from Michaels because I love the look of postcards. For this tutorial, it will take some time to complete but the steps are easy and the final product is beautiful!

I’ve added an extra layer of vintaging to the tutorial by making a crackle effect! I think it looks soooo lovely with the extra details. Whoever receives this card is going to feel truly blessed this Christmas season by all the work you put into this card.

The supplies you’ll need:

1. One 5 1/4 x 3 3/4 inch manilla/cream cardstock

2. On 4 x 5 1/2 inch cream card and envelope (I’m using the Recollections brand of card/envelope)
3. Red and Green Stickles or other glitter glue
4. Fast-drying Tacky Glue (Scotch)
5. ATG gun/tape runner
6. foam dots

7. Archival black ink (StazOn Jet Black)
8. Distress Ink – Vintage Photo and Walnut Stain with foam daubers
9. Red stamp pad – colorbox in red

10. Silver “Merry Christmas” stickers
11. Postcard Stamp – Stampendous Snow Postcard
12. Tim Holtz  French Market Acrylic stamp set – postage stamp piece
13. Acrylic Block – Martha Stewart (the one with foam feet)
14. Ranger Crackle Paint in Rock Candy

Instructions:

1. Place your inset cardstock piece on a craft mat and tack it down with washi tape to avoid dislodging it when stamping.

2. Ink up the postcard stamp with black archival ink and line up the stamp using the guides of the craft mat.

3. Using Scissors or a paper distressing tool, distress the edges of the cardstock.

4. Ink up the foam dauber with Vintage Photo and rub around the edges of the cardstock being careful not to distress the centre of the image too much. I think I may have overdone the centre a bit but you won’t make that mistake! Then ink up a foam dauber with Walnut Stain and distress the edges of the cardstock to make the image pop.
5. Using Rock Candy Crackle Paint and generously layer the cardstock with a layer of the paint. Be careful as some of the vintage photo distress ink will transfer to your paint brush, but only a little bit. Let it dry for about 30 minutes. If you’d like to speed up the drying time, once it’s started to dry and you can clearly see crackles, the bottle says you can use a heat tool to speed it up. Just don’t use your heat tool right off the bat, then you won’t get any crackling. I just let it dry by itself and work on other parts of the project in the meantime. After the crackle paint has COMPLETELY dried (very important this!) put a big text book or dictionary over top of it and let it flatten out since the wet medium has made it crinkle and warp. Let that sit at least an hour to overnight.

6. Ink up the French Market postage stamp acrylic stamp piece with your red stamp pad of choice. I’m using a red colorbox pigment ink. Don’t use distress inks here as the fine details of the stamp will become blurred by the wetness of the distress ink. Then stamp it on some scrap cream cardstock and cut around the edges leaving just a little bit of a border.

7. Use foam dots to attach your red stamp to your now dried piece of cardstock with the stamped postcard and crackled image right over the stamp portion of the postcard image. I found that my foam dots didn’t attach so well the distressed crackle paint so I added a few extra dots of tacky glue to really make a good stick. 

8. Use red Stickles to make holly berries over the stamped postcard image and use the green stickles to fill in the holly leaves. Let dry at least 45 minutes to 1 hour. You can see that my cardstock even sitting under a heavy physics textbook, is still a little warped. Once we glue it to our card, it’ll flatten out.

9. Finally, using your tape runner, adhere your cardstock piece to the card. Since we used the wet crackle paint medium on the cardstock, it’ll be a bit wrinkly and won’t lie flat. Mine had edges that came up after sticking it down to the card with my ATG gun. So I used my tacky glue around the raised edges and pressed for a few seconds and wiped away the excess glue with my finger.

And tada~ the final project all done!

I’d love to hear your comments and suggestions to make this card even better and help out others looking for more efficient techniques!

And please share your vintage style Christmas cards too!